MSU 25-2.0 500x300 wall grille

Performance

Wall grilles are used to aesthetically cover the ventilation opening of ventilation and air conditioning equipment. They are designed for both supply and exhaust air. The pitch of the horizontal fixed slats is 12.5 mm. The width of the view frame is 25 mm. The wall grilles have a slat profile with an angle of rotation of 0° or 15° (see cut). Single row grilles are not equipped with air flow control as standard. Can be provided by using the R1 control. Main advantages include:

- low noise level
- easy installation in ducts or on the wall
- good adjustment parameters
- possibility to direct the air flow
- wide range of colours
- simple design

Design

Rectangular grilles are made of Al profile with transparent anodizing as standard. Burn-in paint in basic RAL shades at extra cost, other colour variants on request.

Installation

The MSU series grilles are installed using pipe or wall mounting frames. The opening for the grille is (W) x (H) for the basic size series.

Mounting

Standard according to mounting springs. Alternatively, grilles can be supplied with pre-drilled screw holes, fixing with magnets or adjustable bolts on request. For installation in the horizontal position, mounting with screws or adjustable clamps is required.

Accessories

Plenum boxes in galvanized steel, standard or insulated. R1 control damper made of galvanised steel fitted with counter-rotating control leaves. Lateral frames made of galvanised steel sheet.