Cabinet
The cabinet is black in colour and made of high quality EPP plastic. The necks are white and are rotatable by 90º. The inside of the unit is easily accessible thanks to special tension locks located on the cabinet. A condensate drain is led out from the bottom of the cabinet. The BP version of the unit is equipped with an exchanger bypass.
Fans
The unit is static – it does not contain fans.
Recuperation
The counterflow plate exchanger is made of plastic and has an efficiency of up to 94%. It is easily accessible from the top of the unit by undoing the tension locks. For summer operation, the BP version of the unit is equipped with an exchanger bypass.
Filter
The unit is equipped with 2 plate filters for exhaust air intake and fresh air intake, G4 (ISO coarse 65%) and M5 (ISO ePM10 50%). The filters are easily accessible from the top of the unit, no tools are required to remove them.
Regulation
A remote control is available as an option to enable BOOST mode (using additional components), control exchanger bypass and disable filter clogging reporting.
Variants
- CADS Flexeo - standard design
- CADS Flexeo BP - version with exchanger bypass
Mounting
The unit is designed for horizontal and vertical indoor mounting. Its low height makes it ideal for installation in ceilings. Installation is carried out using clamps that attach directly to the unit. The unit must be mounted in such a way as to provide space for opening the unit lid, changing filters and connecting the condensate drain to the waste with a siphon cap.
Instructions
Due to the high efficiency of the heat exchanger, reheating is usually not necessary. In areas where temperatures are often below –5 °C, it is recommended to install a hot-water heat exchanger or an electric air preheater of adequate capacity (e.g. MBE-AFP 125/0.4) for fresh air intake. Filter changes are recommended at least once a year.
Information
Static ventilation unit with heat recovery (without fans). The unit is suitable in conjunction with external fans for apartment buildings or smaller commercial buildings. The unit is designed for permanent operation. Maximum flow rate 210 m3/h.