COR-F-2000 N RF air curtain

Cabinet

The cabinet is made of steel sheet powder-coated in white (RAL 9003), the connecting elements are additionally electroplated.

Fans

Special quiet tangential fans are used in the door screens.

Motor

The motor is asynchronous with short armature.

Heater

The boat is without heater.

Electric connection

The electrical connection is made to the internal terminal block in the door screen housing. Models with an electric heater are equipped with thermal protection as standard.

Regulation

Regulation is carried out with the remote control included in the curtain delivery. The controller can be used to switch the speed in 2 (without heater) or 3 stages (with electric heater). The heater power is adjustable in 2 stages (full power and 1/2 power, for COR-3,5 RF only full power). The screens can be arranged side by side.

Noise

All models feature low noise levels due to the balanced impeller.

Options

- COR-F-1000 N RF - without heater
- COR-F-1500 N RF - without heater
- COR-F-2000 N RF - without heater
- COR-3,5-1000 N RF - with el. 3,5 kW heater
- COR-6-1000 N RF - with el. 6 kW heater
- COR-9-1000 N RF - with el. 9 kW heater
- COR-9-1500 N RF - with el. 9 kW heater
- COR-12-1500 N RF - with el. 12 kW heater
- COR-18-2000 N RF - with el. 18 kW heater

Mounting

Clones can be mounted directly on the wall or suspended from the ceiling with M8 threaded rods. The minimum height should be 1.8 m and the maximum 3 m above the floor. The minimum distance from the ceiling or walls must be 100 mm.

Information

A remote controlled air door screen in a compact design with easy installation suitable for small commercial or industrial premises. Multiple screens can be arranged side by side if required.