Cabinet
The cabinet is made of steel sheet powder-coated in white (RAL 9003), the connecting elements are additionally electroplated. The front panel is electrostatically coated for easy installation. The front panel is hinged for easy connection.
Fans
Special quiet tangential fans are used in the door screens.
Motor
The motor is asynchronous with a short armature.
Heater
The boat is without heater.
Electric connection
The electrical connection is made to the internal terminal block in the door screen housing. Models with an electric heater are equipped with thermal protection as standard.
Regulation
Regulation of screens without heater is done with the CR-20 wall controller, which is supplied separately. The controller can be used to switch the speed in two stages. In the case of multiple apertures side by side, up to 5 identical apertures or one pair of COR-IND M 1000 F and COR-IND M 1500 F apertures can be connected to one controller.
Noise
All models feature low noise levels due to the balanced impeller.
Options
- COR-IND M 1000 F - without heater
- COR-IND M 1500 F - without heater
- COR-IND M 1000/12 - with el. 12 kW heater
- COR-IND M 1500/18 - with el. 18 kW
- COR-IND M 1000 W27 - with water heater 27 kW
- COR-IND M 1500 W35 - with water heater 35 kW
Mounting
Clones can be mounted directly on the wall or suspended from the ceiling with M8 threaded rods. The minimum height should be 3 m and the maximum 5 m above the floor. The minimum distance from the ceiling or walls must be 100 mm.
Information
An air door screen in a compact design with easy installation suitable for medium sized commercial premises and industrial buildings. Multiple screens can be arranged side by side if required.