CRVB-450 N1 Ecowatt Plus IP44 roof fan

Cabinet

is designed for vertical air exhaust. The fan base is made of galvanized steel sheet, the brackets, grille and screws are also electroplated. The fan shroud and casing are made of Al sheet metal. The fan motor is mounted in the air stream. Protective grille against contact.

Running wheel

is radial with backward curved blades. It is made of galvanized steel sheet, is statically and dynamically balanced.

Motor

is a DC, special EC, with an external rotor for 230 V/50 Hz (CRVB) or 400 V/50 Hz (CRVT) supply. Permanent operating temperature -20 to +40 °C. Grease-filled ball bearings for life. Protection rating IP44 (CRVB) or IP54 (CRVT).

Rotation direction

is only possible in one direction, in the sense of the arrow on the fan housing. The fan control does not allow changing the direction of rotation.

Fan box

with a revision switch is located on the fan housing. The internal terminal block has connection terminals for speed control, sensor controlled control and for setting and reading operating values. The protection rating is IP55.

Speed control

The fan can be operated in 4 basic modes switchable by setting the switches on the control unit board. The first mode maintains a constant duct pressure based on an integrated sensor. The other modes allow continuous automatic control to constant air flow, proportional mode or ventilation mode with 2 switchable min/max operating characteristics. The control unit allows connection of signals from external devices (CO₂, temperature and relative humidity sensors), external pressure sensor with transducer and 0-10 V or 4-20 mA output. The control allows control via Modbus-RTU. The SPCM-WS Ecowatt Plus module allows you to connect your phone to WiFi and easily set up the fan using the web app. The module is not included.

Options

CRVB-N1 Ecowatt Plus - the system is based on the use of modern elements for DCV systems (demand controlled ventilation). These are fans with microprocessor control, built-in differential pressure sensor, EC motor (electronically commutated), electrically controlled exhaust plate valves, CO₂ sensors, relative humidity sensors, programmable time switches for controlling exhaust plate valves.
CRVB-N Ecowatt - A simpler fan design with EC motor, the fan does not include a constant pressure or flow control module. The fan is controlled only by a 0-10 V (K 1.6) control voltage.

Noise

The noise emitted by the fan is listed in the tables. The values are measured at a distance of 4 m on the discharge side in the horizontal direction.

Caution

Inquire about the permitted combinations of electrical accessories.

Commissioning

Expert installation and commissioning assistance is available for this product.