Share on Facebook
Tweet
Send emailCabinet
The cabinet is black in colour and made of high quality EPP plastic. The necks are white and are rotatable by 90º. The inside of the unit is easily accessible thanks to special tension locks located on the cabinet. A condensate drain is led out from the bottom of the cabinet. The unit is equipped with an exchanger bypass in the BP version.
Fans
Separate fans with backward curved blades and EC electric motors are placed in a black casing made of high quality EPP.
Motor
Single phase EC motors 230 V/50 Hz.
Recuperation
The counter-flow plate heat exchanger is made of plastic and has an efficiency of up to 94%. It is easily accessible from the top of the unit by undoing the tension locks. For summer operation, the BP version of the unit is equipped with an exchanger bypass.
Filter
The unit is equipped with 2 plate filters for exhaust air intake and fresh air intake, G4 (ISO coarse 65%) and M5 (ISO ePM10 50%). The filters are easily accessible from the top of the unit, no tools are required to remove them.
Regulation
A remote control is available as an option to enable BOOST mode (using additional components), control exchanger bypass and disable filter dump reporting.
Variants
- FLEXEO 210 - standard design
- FLEXEO 210 BP - version with exchanger bypass
Mounting
The unit is designed for horizontal and vertical indoor mounting. Its low height makes it ideal for installation in false ceilings. Installation is carried out using clamps that attach directly to the unit. The unit must be mounted in such a way as to provide space for opening the unit lid, changing filters and connecting the condensate drain to the waste with a siphon cap. Due to the design with separate fans, noise to the surrounding area can be effectively reduced.
Instructions
Due to the high efficiency of the heat exchanger, reheating is usually not necessary. In areas where temperatures are often below –5 °C, it is recommended to install a hot-water heat exchanger or an electric air preheater of adequate capacity (e.g. MBE-AFP 125/0.4) for fresh air intake. It is recommended to change filters at least once a year.
Information
A static ventilation unit with heat recovery and separate fans, which can be placed in the duct route due to the building layout. The fans can be located at a sufficient distance from the sheltered accommodation to reduce noise emissions. The unit is suitable in conjunction with external fans for residential dwellings or smaller commercial buildings. The unit is designed for continuous operation. Maximum flow rate 210 m3/h.
