HTB 2500 ceiling fan

Running wheel

is axial, moulded from steel sheet with epoxy lacquer finish. It has eight performance-optimised blades made of aluminium.

Motor

DC brushless motor is designed for continuous operation. The maximum operating ambient temperature is 40 °C. The motor has sealed ball bearings with grease packing for life. The motor has overload protection built into the winding. Insulation class I. IPX0 protection.

Square box

It is accessible by removing the cable cover, which slides along the hanging bar. Connection is by cable under plaster or on plaster. The terminal block contains a relief clip to prevent the cable from being pulled out.

Speed control

Six-stage control by means of the controller included in the delivery. Possibility to change the direction of rotation using the remote control.

Mounting

is done by hanging from the ceiling or other structure. The suspension device must be sufficiently dimensioned, both in terms of static and possible dynamic load. The bottom edge of the fan must be positioned so high that persons in the vicinity of the rotating impeller cannot be endangered. The minimum recommended distance from the floor is 3,5 m. When installing multiple fans, the impeller blades of each fan must not be interchanged. The blades are balanced for each unit separately.

Accessories

- HTB KIT wireless controller with adjustable 1/2/4/8 hour timer (included)
- HIG/HYG room hygrostats
- RTR 6721 room thermostat

Instructions

The fans are particularly suitable for ventilating large areas such as industrial halls, pubs, hotels, sports halls, offices, libraries, study rooms and departure halls due to their robust construction. By permanently ventilating high spaces with a significant temperature differential between floor and ceiling, spatial temperature equalization can be achieved in the winter, thereby significantly reducing energy consumption and heating costs. In these cases, differential thermostats with two sensors can be used advantageously, which switch on a fan at a set temperature difference to mix the warm and cold air zones.

Warning

The fan anchorage must be checked regularly. The inspection period must be specified in the user's operating instructions.