SILENT ECO U 60/GL H IPX5 small centrifugal fan

Cabinet

The cabinet is made of ABS, colour white RAL 9016. ECO-A has a rearward outlet for a pipe diameter of 78 mm. ECO-U has a rearward (Z) or upward (H) outlet for a pipe diameter of 75-80 mm. ECO-A F90 has a rearward outlet for a diameter of 100 mm. There is a check valve on the discharge. Installation is on the wall, flush or in the ceiling. The front grille includes a filter and silencer.

Running wheel

The impeller is radial with forward curved blades, press-fitted to the outer rotor.

Motor

The motor is asynchronous with external rotor, high efficiency and low power consumption. The motor has ball bearings and is equipped with thermal overload protection, max. ambient temperature is 40 ˚C. IPX5 protection.

Square box

The terminal box is accessible by removing the front grille in the fan housing.

Speed control

Speed control is performed by electronic controllers. Two-speed fans ECO-U GL, ECO-A GL are also available.

Variants

- Z - rear outlet (only U-plastered version)
- H - top outlet (only U-plastered version)
- GL- two-speed version
- F90 - fireproof version

Mounting

The ECO-U is installed flush or in the ceiling, in horizontal and vertical position. The extension for extraction of ancillary spaces can be positioned on three sides of the enclosure as required, see illustration. The fan is supplied assembled, the cabinet is covered with a temporary anti-fouling lid and is replaced with a loose-fitting faceplate after installation. The cabinet, motor, fan and faceplate can be supplied separately on special order. The inaccuracy of the brickwork can be compensated by rotating the faceplate by up to approx. 10˚. ECO-A is mounted on the wall or on the ceiling.

Accessories

The U version does not include an extension for extraction of adjacent spaces, to be ordered separately.

Instructions

The fans are suitable for very demanding interiors, architectural designs and for extracting odours directly from sanitary ware.