EV-FLAT air handline unit with heating

Cabinet

It is made of white plastic, the fan with heater is mounted in its own internal cabinet, which can be rotated as required. Depending on the situation, six different connection points for the supply pipe can be chosen - from the side or from the rear. The unit includes an electric reheater and an integrated M5 class filter. The unit is designed for installation in buildings where, due to lack of space, it is necessary to install the unit directly into the ventilated area of the dwelling.

Ventilator

Four-speed radial fan with forward facing blades and a brushless DC motor, which is characterized by low energy consumption and low noise.

Square box

is located inside the unit, with a 1.2 m connection cable leading out of the unit for connection to the mains.

Speed control

is carried out by means of an integrated controller in 4 stages as required.

Temperature control

is carried out automatically with respect to the inlet air temperature and the set fan speed. The heater starts if the supply air temperature falls below the set value. In case of fan failure, the heater is equipped with a two-stage protection that disconnects it.

Mounting

on a smooth wall surface. The pipework is inserted into the prepared holes in the unit, from which the plugs are removed as required. If flexible hoses are to be connected, hose couplings are inserted into the holes. The flexible hoses are then clamped onto these. The nominal diameter of the connection is 100 mm, the maximum outer diameter of the pipe or hose coupling is 102 mm.

Noise

The sound pressure shown in the table is the ambient sound pressure at a distance of 3 m from the unit.

Instructions

The unit is a quality tool for controlled ventilation of apartments and small houses. Its economical operation makes it ideal for continuous ventilation, greatly reducing the risk of condensation and mould growth. The built-in filter also reduces the penetration of dust and pollen from the outside environment.

Highlights

The unit and microprocessor controller may only be reprogrammed by an authorized service technician, otherwise no claim can be made.