Share on Facebook
Tweet
Send emailCabinet
is made of impact-resistant plastic, colour is white. The cabinet is designed for wall mounting.
The impeller
is axial, made of high quality impact resistant plastic.
Motor
is asynchronous with short armature and shielded pole. The motor is equipped with overload protection. The maximum operating ambient temperature is 40 ˚C. The motor has plain or grease-filled ball bearings for life depending on the variant selected. IPX4 protection.
The terminal box
is accessible by removing the front fan grille. Connection is via a concealed cable.
Speed control
is carried out by changing the voltage with special regulators.
Noise
emitted by the fan is measured at a distance of 1.5 m in the fan axis on the suction side.
Mounting
horizontally and vertically, preferably with the motor axis in a horizontal position, taking into account the life of the bearings. Fixing with four screws under the fan grille. Screws and dowels are included.
Variants
- C - check damper
- T - run-out
- Z - ball bearings
Instructions
The fans are suitable for short ducts with low pressure drop or for direct through-wall ventilation. The fans can be used for ventilation in residential construction. The fan is primarily designed for wholesale electrical, plumbing, and applications where emphasis is placed on the cost of the fan.
