HCFB/4-315 H IP65 axial fan

Cabinet

It is made of steel sheet, coated with black lacquer, the screws are electroplated.

Running wheel

is made of glass fibre reinforced thermoplastic. The impeller is statically and dynamically balanced.

Motor

is asynchronous with resistive armature, stator with cooling fins, black lacquer finish. The motors are equipped with thermal protection as standard, the windings are tropicalised with class F insulation and an operating temperature of -40 to +70 °C. Grease-filled ball bearings for life. IP65 protection.

Speed control

is carried out by electronic or transformer regulators by changing the voltage, for three-phase types by frequency converters.

Rotation direction

can be changed for both single-phase and three-phase motors. With a standard impeller, the flow rate drops by approx. 30% when the direction of rotation is reversed. With the wall-mounted version, the air flow from the motor to the impeller is standard.

Clamps

is made of black plastic as standard. In the single-phase version it also includes a start-up capacitor. The terminal block is located on the motor (wall-mounted version).

Noise

fans emitted by the fan are tabulated, measurements are made at a distance equal to three times the impeller diameter (but at least 1,5 m) in the free acoustic field.

Mounting

of the fan in each position of the motor axis. The housing shall not transmit mechanical stresses from the building structures.