SILENT ECO AEC IPX5 small radial fan

Cabinet

is made of ABS, deformation resistant, two-component finish in glossy finish, colour white RAL 9016. There is a non-return flap on the discharge. The front grille contains a filter and silencer. The enclosure shall include a filter change indicator. ECO-AEC has a discharge outlet to the rear for pipes with a diameter of 75-80 mm. ECO-UEC has a discharge outlet to the top (optionally to the rear) for pipes with a diameter of 75-80 mm. It also has a preparation for three outlets to vent the toilet bowl (Ø 40/50 mm) or adjacent rooms (Ø 75/80 mm). Nozzles are not included in the delivery of the fan.

Running wheel

is radial with forward curved blades, press-fitted to the outer rotor.

Motor

Maintenance-free EC motor with the highest energy efficiency class. The motor has a built-in thermal overload protector, max. ambient temperature is 40 ˚C. IPX5 protection.

Square box

is accessible by removing the front grille in the fan housing.

Mounting

ECO-AEC is mounted on the wall or on the ceiling.
The ECO-UEC is mounted flush to the plaster or to the ceiling, in both horizontal and vertical positions. The extension for extraction of adjacent spaces can be positioned on three sides of the enclosure as required, see illustration. The fan is supplied assembled, the cabinet is covered with a temporary anti-fouling lid and is replaced with a loose-fitting faceplate after installation. The inaccuracy of the brickwork can be compensated by rotating the faceplate by up to approx. 10˚.

Options

SILENT ECO-UEC variants available:
- Z concealed, rear outlet
- H concealed, top outlet
SILENT ECO-AEC concealed, rear outlet

Air-conditioning accessories

- ECO-UEC does not include an attachment for extraction of adjacent spaces, must be ordered separately.
- 40/50 mm extension for ECO-UEC toilet bowl extraction extension
- 75/80 mm extension for ECO-UEC side room extraction extension
- SILENT plastic bracket type MBK
- SILENT metal bracket type MBM
- Sump 100/75, 100/50 extension for connection of plate valve DN100 mm for extraction from second room
- IT 100 plate valve (K 7.2)
- LG 100 outdoor plastic grille (K 7.1)
- PER 100 outdoor check valve (K 7.1)
- PT door inlet grille (K 7.1)
- Aluflex^®, Sonoflex^®, Greyflex^®, Semiflex^® flexible hoses (K 7.3)

EL Accessories

Pre-programmed EC modules
- EC 02 timing (0 min on, 4 min off*)
- EC 03 GL base flow 20 m³/h (stage 1), continuous operation*
- EC 04 NRGL timing (1 min on, off 8 min*), basic flow rate 20 m³/h (stage 1), continuous operation*
- EC 05 NREGL timing (on 0 min, off 4 min*), basic flow rate 20 m³/h (stage 1), continuous operation*
- EC 06 NR timing (on 1 min,off 8 min.*)
- EC 07 HYBEW0-10 automatic humidity sensor control, automatic motion sensor control, 0-10 V / PWM (if no base flow or timing is required)

Additional components
- EC-HYM relative humidity sensor
- EC-BEW motion sensor
- EC-10VPWM cable for external analogue 0-10 V signal

* For automatic humidity sensor control, automatic motion sensor control and 0-10 V / PWM, no additional programming is required if the required sensors are available.

Instructions

The fans are suitable for very demanding interiors, architectural solutions and for the extraction of odours directly from sanitary ware. The fans can be easily set up using the ECO EC Android app.